//-------------------------------------- English ---------------------------------------------------------------------
Description:
Our SL04 box can unlock 64 universes of output (64 × 512 = 327684 parameters). Note that this is a standard Artnet output, allowing MA3 onPC to connect to any brand of Artnet extender.
The universes we unlock are real, output-capable universes, not the virtual universes of the official Vizkey box. The official Vizkey box uses virtual universes, which cannot be connected to external artnet extenders, whereas our solution provides actual, usable universes.
All firmware versions of the SL04 box support unlocking 64 universes—this feature is not dependent on the firmware version. 
However, if your box's firmware is below v6.2, we recommend using the LAN port, as it has no bugs.
For firmware versions below v6.2, the USB network adapter has bugs. If you want stable USB performance, we suggest sending the box back to us for an upgrade to v6.2, which fully resolves all USB network adapter issues.

Technical Notes:
MA3 encrypts each DMX512 channel using a key generated from your computer's hardware fingerprint. Due to MA3's encryption method, we must simulate a FakeKey for decryption on each new computer.
You can generate this FakeKey yourself via our server. Every new computer requires one generation, and as long as you have our box, you can generate it unlimited times for free on any computer.
⚠️ Do not generate it too frequently, or risk controls may be triggered.
Important: The generated FakeKey is for MA3, not the SL04 box. Once generated on a computer, you can use any SL04 box (regardless of SN) without regenerating.
If MA3 prompts for a FakeKey, simply rerun MakeFakeKey.exe to generate a new one.

Technical Upgrade (After 2025-07-27):
✅ Removed IP Restrictions - Previously only supported the 2.x.x.x range, now open to any segment (10.x.x.x, 192.x.x.x, etc.).
✅ Flexible Subnet Mask - No longer limited to 255.255.255.0; supports various masks like 255.0.0.0.
✅ Multi-Destination Output - Artnet data is simultaneously sent to the box's IP segment, 127.0.0.1/loopback NIC, and built-in NICs on the same subnet, facilitating connections to 3D software like Depence and external expanders.
✅ Resolved Bandwidth Congestion - The SL04 box's USB NIC bandwidth is 12M, and the RJ45 LAN port is 10M. The plugin has resolved bandwidth issues, eliminating congestion.
✅ Fixed the issue where the built-in NIC's high priority intercepted data—now this problem no longer exists.
✅ Resolved the frequent issue of the box not being detected on Windows 10.
✅ Reduced computer resource usage.
✅ The upgraded plugin (2025-08-07) allows the box to work immediately upon connecting to a computer, achieving true plug-and-play functionality. It can even be used without configuring the box's network card IP.

MakeFakeKey How to Use:
Connect the SL04 box to your PC and run MakeFakeKey.exe (requires internet), Multi-language support (auto-detects system language).
Click GetKey – The software generates your FakeKey and opens a plugin download page.
(⚠️Plugin download links change frequently! To get a new link, rerun MakeFakeKey.exe and click DownLink.)
MakeFakeKey download: http://down.hahan123.com/down_server/SuperLightBox/grandMA3_onPC/


Plugin Installation:
Download & install the latest MA3 software from: https://malighting.com
Copy our 2 plugin files to MA3's installation directory:
Path: C:\Program Files\MALightingTechnology\gma3_2.3.2\bin
Overwrite app_gma3.exe (back up the original first!).
Add files to your antivirus whitelist.
No MA3 configuration needed! Just set your network card's IP—the box auto-configures.
No IP/subnet restrictions (use any IP/mask).
Note: In the 3D software like Depence, do not select the Box Network Card. Please choose 127.0.0.1, the loopback network card, or the built-in network card (as long as the subnet is the same as SL04 box). These network cards will output data for 64 universe. If you select the Box Network Card, it will only output the universe corresponding to the box's actual output ports (4 universe).

Quick use Summary:
Run MakeFakeKey.exe → GetKey → Download plugins (supports all MA3 versions).
Extract & copy 2 plugin files to MA3's directory → Whitelist in antivirus.
Launch MA3 – No setup required! For the Session IP, prefer 127.0.0.1 and avoid selecting the box's NIC IP address.
//------------------------------------- end English--------------------------------------------------------------------



//---------------------------------------- Chinese ------------------------------------------------------------------------------------------
说明：
我们的SL04盒子可解锁MA3 onPC 64个DMX域输出（64×512=32768个参数），这是标准Artnet输出，支持MA3 onPC连接任意品牌的Artnet扩展器。
与官方Vizkey盒子的虚拟域不同，我们解锁的是真实可输出的域，官方Vizkey采用虚拟域，无法连接外部Artnet扩展器，而我们提供的是真正可使用的输出域。

所有固件版本的SL04盒子均支持64域解锁功能，该功能与固件版本无关。
但若盒子固件版本低于v6.2，建议优先使用LAN接口（该接口无任何bug）。
v6.2以下版本的USB网卡存在稳定性问题，如需获得最佳USB使用体验，建议将设备寄回升级至v6.2版本，该版本已彻底修复USB网卡所有问题。

技术说明：
MA3会通过计算机硬件指纹生成的密钥加密每个DMX512通道，基于此加密特性，我们需要在任何新电脑上模拟出FakeKey进行解密。
您可通过我们的服务器自主生成FakeKey，每台新电脑仅需生成一次，如果您有SL04盒子即可无限次免费生成（请勿频繁操作以免触发风控）。
重要提示：FakeKey仅用于MA3软件，与SL04盒子无关。在电脑生成一次后，即可随意更换不同SN的SL04盒子使用，无需重新生成。
若MA3提示需要FakeKey，只需重新运行MakeFakeKey.exe生成即可。

技术升级（2025-07-27后）：
✅ 取消IP限制 - 原仅支持2.x.x.x网段，现开放10.x.x.x、192.x.x.x等任意网段
✅ 灵活子网掩码 - 不再限定255.255.255.0，支持255.0.0.0等多种掩码
✅ 多路输出 - Artnet数据同时发送至盒子IP段和127.0.0.1/回环网卡/相同网段的内置网卡，方便接Depence等3D软件和接外部扩展器使用
✅ 解决带宽堵塞 - SL04盒子的USB网卡带宽为12M，RJ45 LAN接口为10M，插件解决了带宽问题，不再堵塞。
✅ 解决内置网卡优先级高拦截数据问题，现在不再有这个困扰了。
✅ 解决Win10经常找不到盒子问题。
✅ 减少电脑资源占用。
✅ 2025年8月7日升级后的插件，盒子插入电脑即可使用，真正实现即插即用，甚至无需配置盒子网卡的IP就能直接使用。


MakeFakeKey使用指南：
连接SL04盒子至电脑，运行MakeFakeKey.exe（需联网），支持多语言（自动匹配系统语言）
点击GetKey生成FakeKey，同时会自动打开插件下载页面 (⚠️ 插件下载链接会不定期变化！获取新链接请重新运行MakeFakeKey.exe点击DownLink )
MakeFakeKey下载地址：http://down.hahan123.com/down_server/SuperLightBox/grandMA3_onPC/


插件安装：
从官网下载最新版MA3软件：https://malighting.com
将两个插件文件复制至MA3安装目录：
路径：C:\Program Files\MALightingTechnology\gma3_2.3.2\bin
覆盖app_gma3.exe（建议先备份原文件）
将文件添加至杀毒软件白名单
无需MA3设置！只需配置网卡IP，盒子会自动适配，支持任意IP/子网掩码组合
注意：3D软件，比如Depence里面不要选择盒子网卡，请选择127.0.0.1或者环回网卡或者内置网卡(只要网段和盒子一样就可以)，这些网卡会输出64个域数据。如果选择盒子网卡只会输出盒子实际输出口的域(4个)。

快速操作流程：
运行MakeFakeKey.exe → GetKey → 下载插件（支持所有MA3版本）
解压后复制两个文件至MA3目录 → 添加杀毒软件白名单
启动MA3 - MA3无需任何配置就可以使用！Session IP尽量选择127.0.0.1，不要选择盒子网卡IP地址。

                hahan
             2025.11.07